1.路由器型號及版本

型號：RSR30-X-SPU10

當前版本：RGOS 10.4(3b36) Release(192911)

2.升級路由器

（1）電腦搭建TFTP，手動將版本文件重命名為rgos.bin

（2）電腦與路由器網線互聯，配置互聯IP地址，電腦IP-192.168.10.2，路由器IP-192.168.10.1

（3）登錄路由器，從TFTP服務器拷貝版本文件至交換機

（4）刪除互聯IP地址

route# copy tftp:? ?flash:
Address of remote host []?192.168.10.2
Source filename []?rgos.bin
Extended commands [n]: 回車
Destination filename [rgos.bin]?rgos.bin
Accessing tftp://192.168.10.2/rgos.bin...
System is running defragment,please wait....?
Press Ctrl+C to quit
The file has existed, do you want to overwrite it? [yes/no]: yes
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Transmission finished, file length 25803488 bytes.
Verify the image ......[ok]

CURRENT PRODUCT INFORMATION :
? PRODUCT ID: 0x100F0060
? PRODUCT DESCRIPTION: Ruijie Router (RSR30-X-SPU10) by Ruijie Networks

SUCCESS: UPGRADING OK.
route#wr

Building configuration...
Write to boot config file: [/config.text]

[OK]
route#reload
Proceed with reload? [no]y
Verify the image ......[ok]

*Jul 31 16:05:29: %SYS-5-RELOAD: The device is reloading due to the execution of command reload.

中間輸入的日志省略，自動重啟完成后會提示輸入賬號密碼

route>en

route#show version?
System description ? ? ?: Ruijie Router (RSR30-X-SPU10) by Ruijie Networks
System start time ? ? ? : 2022-07-31 16:8:30
System uptime ? ? ? ? ? : 0:0:2:59
System software version : RGOS 10.4(3b90) Release(222488)
System BOOT version ? ? : 10.4(3b90) Release(222488)(Master), 10.4(3b33) Release(184295)

route#conf t
Enter configuration commands, one per line. ?End with CNTL/Z.
route(config)# int gi0/0/6
route(config-if-GigabitEthernet 0/0/6)#no ip add?
%notice: all IPv4 addresses on this interface are removed.

route#wr
Building configuration...
Write to boot config file: [/config.text]

[OK]
?文章來源地址http://www.zghlxwxcb.cn/news/detail-490375.html

到了這里，關于銳捷Ruijie路由器版本升級的文章就介紹完了。如果您還想了解更多內容，請?jiān)谟疑辖撬阉鱐OY模板網以前的文章或繼續瀏覽下面的相關文章，希望大家以后多多支持TOY模板網！