記錄遇到過的問題:
[Labtools 27-3733] Error during cs_server initialization: Failed to connect cs_server at TCP:localhost:3042 to hw_server at TCP:localhost:3121.
燒錄程序時,打開硬件目標找不到JTAG。
(此鏈接可見詳情)xilinx vivado 2019 驅動問題,Connecting to hw_server url TCP:localhost:3121,jtag連接不上 | 碼農家園 (codenong.com)
一般情況下是因為Vivado的驅動沒有安裝好,只需要將驅動安裝上即可,路徑為(可以按照這個去找)D:\programme\Xilinx\Vivado\2019.2\data\xicom\cable_drivers\nt64\digilent\install_digilent.exe
【建議】在安裝的過程中,將vivado關閉,所有USB接口拔掉,安裝驅動成功后在重新開始打開vivado進行連接。文章來源:http://www.zghlxwxcb.cn/news/detail-785981.html
另:計算機名字如果是中文,也會引起vivado的報錯。文章來源地址http://www.zghlxwxcb.cn/news/detail-785981.html
到了這里,關于[Labtools 27-3733] Error during cs_server initialization: Failed to connect cs_server at TCP:localho的文章就介紹完了。如果您還想了解更多內容,請在右上角搜索TOY模板網以前的文章或繼續瀏覽下面的相關文章,希望大家以后多多支持TOY模板網!