頭文件代碼
#ifndef __HEAD_H__
#define __HEAD_H__
typedef struct{
unsigned int MODER;
unsigned int OTYPER;
unsigned int OSPEEDR;
unsigned int PUPDR;
unsigned int IDR;
unsigned int ODR;
}gpio_t;
#define PHY_LED1_ADDR 0X50006000
#define PHY_LED2_ADDR 0X50007000
#define PHY_LED3_ADDR 0X50006000
#define PHY_RCC_ADDR 0X50000A28
//功能碼
#define LED_ON _IOW('l',1,int)
#define LED_OFF _IOW('l',0,int)
#endif
?應用層代碼文章來源：http://www.zghlxwxcb.cn/news/detail-608537.html
#include <stdlib.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <string.h>
#include <sys/ioctl.h>
#include "head.h"
int main(int argc, char const *argv[])
{
char buf[128] = {0};
int a, b;
int fd;
while (1)
{
// 從終端讀取
printf("請輸入要打開哪個設備>");
printf("0:LED1 1:LED2 2:LED3\n");
printf("請輸入>");
scanf("%d", &b);
if (b == 0)
{
fd = open("/dev/mycdev0", O_RDWR);
}
else if (b == 1)
{
fd = open("/dev/mycdev1", O_RDWR);
}
else if (b == 2)
{
fd = open("/dev/mycdev2", O_RDWR);
}
if (fd < 0)
{
printf("打開設備文件失敗\n");
exit(-1);
}
printf("請輸入指令\n");
printf("0(關燈) 1(開燈)\n");
printf("請輸入>");
scanf("%d", &a);
switch (a)
{
case 1:
ioctl(fd, LED_ON); // 開燈
break;
case 0:
ioctl(fd, LED_OFF);
break;
}
close(fd);
}
return 0;
}
?驅動代碼文章來源地址http://www.zghlxwxcb.cn/news/detail-608537.html
#include <linux/init.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/io.h>
#include <linux/device.h>
#include <linux/uaccess.h>
#include<linux/slab.h>
#include<linux/cdev.h>
#include "head.h"
dev_t devid;
struct cdev *cdev;
unsigned int major = 500;
unsigned int minor = 0;
gpio_t *vir_led1;
gpio_t *vir_led2;
gpio_t *vir_led3;
unsigned int *vir_rcc;
struct class *cls;
struct device *dev;
int mycdev_open(struct inode *inode, struct file *file)
{
//獲取當前設備文件對應的設備號
int which_dev = inode->i_rdev;
//將次設備號保存到當前文件的file結構中
file->private_data = (void *)MINOR(which_dev);
printk("%s:%s:%d\n", __FILE__, __func__, __LINE__);
return 0;
}
long mycdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
unsigned int which_dev = (unsigned int)file->private_data;
switch(which_dev)
{
case 0:
//LED1控制邏輯；
if(cmd == LED_ON)
{
vir_led1->ODR |= (0x1 << 10); // LED1開燈
}
else if(cmd == LED_OFF)
{
vir_led1->ODR &= (~(0X1 << 10));
}
break;
case 1:
//LED2控制邏輯；
if(cmd == LED_ON)
{
vir_led2->ODR |= (0x1 << 10); // LED2開燈
}
else if(cmd == LED_OFF)
{
vir_led2->ODR &= (~(0X1 << 10));
}
break;
case 2:
//LED3控制邏輯；
if(cmd == LED_ON)
{
vir_led3->ODR |= (0x1 << 8); // LED3開燈
}
else if(cmd == LED_OFF)
{
vir_led3->ODR &= (~(0X1 << 8));
}
break;
}
return 0;
}
ssize_t mycdev_read(struct file *file, char *ubuf, size_t size, loff_t *lof)
{
printk("%s:%s:%d\n", __FILE__, __func__, __LINE__);
return 0;
}
ssize_t mycdev_write(struct file *file, const char *ubuf, size_t size, loff_t *lof)
{
printk("%s:%s:%d\n", __FILE__, __func__, __LINE__);
return 0;
}
int mycdev_close(struct inode *inode, struct file *file)
{
printk("%s:%s:%d\n", __FILE__, __func__, __LINE__);
return 0;
}
// 定義操作方法風扇結構體變量并賦值
struct file_operations fops = {
.open = mycdev_open,
.unlocked_ioctl = mycdev_ioctl,
.release = mycdev_close,
.read = mycdev_read,
.write = mycdev_write,
};
// 燈的寄存器映射以及初始化
int all_led_init(void)
{
// 寄存器地址的映射
vir_led1 = ioremap(PHY_LED1_ADDR, sizeof(gpio_t));
if (vir_led1 == NULL)
{
printk("ioremap filed：%d\n", __LINE__);
return -ENOMEM;
}
vir_led2 = ioremap(PHY_LED2_ADDR, sizeof(gpio_t));
if (vir_led2 == NULL)
{
printk("ioremap filed：%d\n", __LINE__);
return -ENOMEM;
}
vir_led3 = vir_led1;
vir_rcc = ioremap(PHY_RCC_ADDR, 4);
if (vir_rcc == NULL)
{
printk("ioremap filed：%d\n", __LINE__);
return -ENOMEM;
}
printk("物理地址映射成功\n");
// 寄存器的初始化
// rcc
(*vir_rcc) |= (3 << 4);
// led1
vir_led1->MODER &= (~(3 << 20));
vir_led1->MODER |= (1 << 20);
vir_led1->ODR &= (~(1 << 10));
// led2
vir_led2->MODER &= (~(3 << 20));
vir_led2->MODER |= (1 << 20);
vir_led2->ODR &= (~(1 << 10));
// led3
vir_led3->MODER &= (~(3 << 16));
vir_led1->MODER |= (1 << 16);
vir_led1->ODR &= (~(1 << 8));
printk("燈的寄存器初始化成功\n");
return 0;
}
static int __init mycdev_init(void)
{
int ret;
// 1.申請對象空間 cdev_alloc
cdev = cdev_alloc();
if (cdev == NULL)
{
printk("申請驅動對象空間失敗\n");
ret = -EFAULT;
goto OUT1;
}
printk("申請驅動對象空間成功\n");
// 2.初始化對象 cdev_init
cdev_init(cdev, &fops);
// 3.申請設備號 register_chrdev_region()/alloc_chrdev_region()
// 動態申請
if (major == 0)
{
ret = alloc_chrdev_region(&devid, minor, 3, "mycdev");
if (ret != 0)
{
printk("動態申請設備號失敗\n");
goto OUT2;
}
//統一后面的操作
major = MAJOR(devid); //根據設備號獲取主設備號
minor = MINOR(devid);
}
//靜態指定申請
else
{
ret = register_chrdev_region(MKDEV(major,minor),3,"mycdev");
if(ret != 0)
{
printk("靜態指定設備號失敗\n");
goto OUT2;
}
}
printk("申請設備號成功\n");
// 4.注冊驅動對象 cdev_add()
ret = cdev_add(cdev, MKDEV(major,minor), 3);
if (ret != 0)
{
printk("注冊設備驅動對象失敗\n");
goto OUT3;
}
printk("注冊設備驅動對象成功\n");
// 5.向上提交目錄 class_create()
cls = class_create(THIS_MODULE, "mycdev");
if (IS_ERR(cls))
{
printk("向上提交目錄失敗\n");
goto OUT4;
}
printk("向上提交目錄成功\n");
// 6.向上提交設備信息 device_create()
int i;
for (i = 0; i < 3; i++)
{
dev = device_create(cls, NULL, MKDEV(major, i), NULL, "mycdev%d",i);
}
if (IS_ERR(dev))
{
printk("向上提交設備節點信息失敗\n");
goto OUT5;
}
printk("向上提交設備節點信息成功\n");
// 燈的寄存器映射以及初始化
all_led_init();
return 0;
OUT5:
//將提交成功的設備信息銷毀
for(--i;i>=0;i--)
{
device_destroy(cls,MKDEV(major,i));
}
OUT4:
class_destroy(cls);
OUT3:
unregister_chrdev_region(MKDEV(major,minor), 3);
OUT2:
kfree(cdev);
OUT1:
return ret;
}
static void __exit mycdev_exit(void)
{
// 取消地址映射
iounmap(vir_led1);
iounmap(vir_led2);
iounmap(vir_rcc);
// 1.銷毀設備信息 device_destroy
int i;
for(i=0;i<3;i++)
{
device_destroy(cls,MKDEV(major,i));
}
// 2.銷毀目錄 class_destroy
class_destroy(cls);
// 3.注銷驅動對象 cdev_del
cdev_del(cdev);
// 4.釋放設備號 unregister_chrdev_region()
unregister_chrdev_region(MKDEV(major,minor),3);
// 5.釋放對象空間 kfree()
kfree(cdev);
}
module_init(mycdev_init);
module_exit(mycdev_exit);
MODULE_LICENSE("GPL");到了這里，關于【驅動開發day4作業】的文章就介紹完了。如果您還想了解更多內容，請在右上角搜索TOY模板網以前的文章或繼續瀏覽下面的相關文章，希望大家以后多多支持TOY模板網！
