国产 无码 综合区,色欲AV无码国产永久播放,无码天堂亚洲国产AV,国产日韩欧美女同一区二区

Socket error Event: 32 Error: 10053.

這篇具有很好參考價值的文章主要介紹了Socket error Event: 32 Error: 10053.。希望對大家有所幫助。如果存在錯誤或未考慮完全的地方,請大家不吝賜教,您也可以點擊"舉報違法"按鈕提交疑問。

一、報錯 :

Socket error Event: 32 Error: 10053.

二、問題:

xshell連接虛擬機斷連

三、原因:

虛擬機中ssh連接中有一個超時剔除會話機制,這個機制會在一定時間內沒有活動的SSH會話自動斷開連接。

  1. 該問題可以通過修改虛擬機中的SSH服務器配置來調整這個會話超時時間。

  2. 具體的配置方式可能因不同的操作系統和SSH服務器版本而有所不同。

  3. 一般來說,您可以通過編輯SSH服務器的配置文件(如/etc/ssh/sshd_config)并修改ClientAliveInterval和ClientAliveCountMax參數的值來調整會話超時時間。

  • ClientAliveInterval參數定義了服務器發送保持活動消息的時間間隔,單位為秒??梢詫⑵湓龃?,以延長會話超時時間。
  • ClientAliveCountMax參數定義了服務器在未收到客戶端響應之后斷開連接之前的最大保持活動消息數??梢詫⑵湓龃?,以延長會話超時時間。
  1. 修改完配置文件后,記得重新啟動SSH服務器使配置生效。

  2. 請注意,修改SSH服務器配置涉及到系統級的操作,需要以管理員身份進行,并且在修改配置文件之前最好備份原始配置文件。

四、解決方案:

設置客戶端自動發送響應,也就是至少3秒內發送一次響應,來保證客戶端是在線的,而讓虛擬機不踢掉此會話
選中會話,右鍵屬性,默認間隔60秒
Socket error Event: 32 Error: 10053.,Bug記錄,linux
這里將其設置成0s,縮短心跳發送間隔
Socket error Event: 32 Error: 10053.,Bug記錄,linux

五、總結:

Socket error Event: 32 Error: 10053 indicates a connection abort error. This error occurs when a connection is forcibly closed by the remote host.

Possible causes for this error include:

1、Network issues: There might be network problems, such as a weak or unstable internet connection, that are causing the connection to be interrupted.

2、Firewall or antivirus software: Your firewall or antivirus software may be blocking the connection, resulting in the error.

3、Server-side issues: The server you are trying to connect to may be experiencing issues or may have terminated the connection.

4、Timeouts: If the connection takes too long to establish or if there is a long period of inactivity, the server may close the connection, leading to this error.

To troubleshoot this error, you can try the following steps:

1、Check your internet connection: Ensure that you have a stable and strong internet connection. You can try restarting your modem or router to refresh the connection.

2、Disable firewall or antivirus software: Temporarily disable your firewall or antivirus software to see if they are causing the issue. If the error goes away, you may need to adjust the settings to allow the connection.

3、Contact the server administrator: If the error persists, it might be a server-side issue. Reach out to the administrator of the server you are trying to connect to and inform them about the error you are facing.

4、Check for server timeouts: If you are experiencing this error during long periods of inactivity, you may need to adjust the server’s timeout settings or implement keep-alive mechanisms to maintain the connection.

Note that the specific resolution may vary depending on the context in which this error occurs.文章來源地址http://www.zghlxwxcb.cn/news/detail-536282.html

到了這里,關于Socket error Event: 32 Error: 10053.的文章就介紹完了。如果您還想了解更多內容,請在右上角搜索TOY模板網以前的文章或繼續瀏覽下面的相關文章,希望大家以后多多支持TOY模板網!

本文來自互聯網用戶投稿,該文觀點僅代表作者本人,不代表本站立場。本站僅提供信息存儲空間服務,不擁有所有權,不承擔相關法律責任。如若轉載,請注明出處: 如若內容造成侵權/違法違規/事實不符,請點擊違法舉報進行投訴反饋,一經查實,立即刪除!

領支付寶紅包贊助服務器費用

相關文章

  • [BUG] Authentication Error

    [BUG] Authentication Error

    給服務器安裝了一個todesk,但是遠程一直就是,點擊用戶,進入輸入密碼界面,還沒等輸入就自動返回了 服務器是無桌面版本,或者桌面程序死掉了,重新安裝就好 sudo apt install xorg sudo apt install kubuntu-desktop

    2024年01月24日
    瀏覽(13)
  • 【常見 Error & Bug】Vivado仿真報錯 ERROR: [XSIM 43-3322] 解決方法

    【常見 Error & Bug】Vivado仿真報錯 ERROR: [XSIM 43-3322] 解決方法

    在進行 DDR3 實驗時,仿真時出現以下報錯信息。 ERROR: [XSIM 43-3322] Static elaboration of top level Verilog design unit(s) in library work failed. 谷歌翻譯為:錯誤:[XSIM 43-3322]頂層Verilog設計單元在庫工作中靜態精化失敗。 經過仔細檢查,發現出現這個報錯主要可能有以下兩種原因: 例化名寫錯

    2024年02月11日
    瀏覽(50)
  • Mac OpenVPN報錯:Transport Error: socket_protect error (UDP)

    在一部分Mac上使用OpenVPN進行連接公司網絡,出現錯誤: 在啟動這個OpenVPN時,不知道什么原因?qū)е?/var/run/agent_ovpnconnect.sock 服務沒有正常啟動 手動啟動相關服務; 缺點是重啟電腦后,下次還要手動輸入相關命令; 設置自動加載命令,加載并啟動相關服務,重啟電腦后不用重新

    2024年02月16日
    瀏覽(5)
  • socket連接 error 113 /111 的解決方法

    socket.error [errno 113] No route to host. 逐步檢查原因: 1、檢查路由通路是否正確,路由表、網關和ip設置是否正確 2、路徑中的路由器防火墻是否允許通路,比如 CentOS 的防火墻 firewalld, Ubuntu 的 ufw設置??梢灾苯雨P(guān)閉處理 socket.error [errno 111] Connection refused. 逐步檢查原因: 1、開放

    2024年02月12日
    瀏覽(23)
  • 【Linux下qt軟件安裝打包附帶問題: dpkg: error processing package xxxx +解決方式+自我嘗試+記錄】

    【Linux下qt軟件安裝打包附帶問題: dpkg: error processing package xxxx +解決方式+自我嘗試+記錄】

    第一篇:使用linuxdeployqt軟件生成 第二篇:桌面文件.desktop,文件編寫與軟件圖標 第三篇:打包生成安裝的包(.deb) 記得之前 學會了使用linuxdeployqt軟件生成,打包,已經安裝等各種細節,使用一個“test demo” 工程樣例,來實現以及說明相關操作流程。但是后在使用的時候,

    2024年04月15日
    瀏覽(37)
  • 解決BUG:error: metadata-generation-failed

    BUG說明: 執行命令:pip install -r requirements.txt -i https://pypi.tuna.tsinghua.edu.cn/simple 時報錯,經分析未檢測單setuptools-57.5.0 具體報錯如下: 解決方案: 在執行批量安裝命令pip install -r requirements.txt -i https://pypi.tuna.tsinghua.edu.cn/simple之前,先執行pip install setuptools==57.5.0 -i https://pypi.

    2024年02月13日
    瀏覽(36)
  • bug:cv2.error: OpenCV(4.7.0)

    bug:cv2.error: OpenCV(4.7.0)

    cv2.error: OpenCV(4.7.0) D:aopencv-pythonopencv-pythonopencvmodulesobjdetectsrccascadedetect.cpp:1689: error: (-215:Assertion failed) !empty() in function \\\'cv::CascadeClassifier::detectMultiScale\\\' (1)路徑寫錯了,多了斜杠 (2)img = cv2.imread(“…/data/lena.jpg”) 路徑中不能有中文 路徑不對也會報錯

    2024年02月11日
    瀏覽(20)
  • vue2.0運行導入的項目出現node:events:491 throw er; // Unhandled ‘error‘ event錯誤提示解決辦法

    vue2.0運行導入的項目出現node:events:491 throw er; // Unhandled ‘error‘ event錯誤提示解決辦法

    只為記錄自己遇到的錯誤。 ?錯誤提示: App running at: ? - Local: ? http://localhost:8080/ ? - Network: unavailable ? Note that the development build is not optimized. ? To create a production build, run npm run build. node:events:491 ? ? ? throw er; // Unhandled \\\'error\\\' event ? ? ? ^ 在嘗試過關閉占用端口后還是無法解決

    2024年02月02日
    瀏覽(30)
  • error An unexpected error occurred: “https://registry.npmmirror.com/moment: tunneling socket could n

    error An unexpected error occurred: “https://registry.npmmirror.com/moment: tunneling socket could n

    yarn install 的時候報了錯誤 解決方法 我換了原來的鏡像 yarn 不行就換npm,確保都換了,然后這個報錯就可以解決了 如果還不行的,檢查你的代理地址是否正確,是否防火墻影響

    2024年02月04日
    瀏覽(19)
  • 已解決ERROR:ssl_client_socket_impl.cc(992)] handshake failed; returned -1, SSL error code 1, net_error

    已解決ERROR:ssl_client_socket_impl.cc(992)] handshake failed; returned -1, SSL error code 1, net_error

    已解決ERROR:ssl_client_socket_impl.cc(992)] handshake failed; returned -1, SSL error code 1, net_error -101 粉絲群里面的一個小伙伴遇到問題跑來私信我,想用selenium操作瀏覽器自動化,但是發生了報錯(當時他心里瞬間涼了一大截,跑來找我求助,然后順利幫助他解決了,順便記錄一下希望可以

    2023年04月15日
    瀏覽(20)

覺得文章有用就打賞一下文章作者

支付寶掃一掃打賞

博客贊助

微信掃一掃打賞

請作者喝杯咖啡吧~博客贊助

支付寶掃一掃領取紅包,優惠每天領

二維碼1

領取紅包

二維碼2

領紅包