在Rocky9中，丟棄使用了傳統的network 而使用新的NetworkManager管理方式

所有較之前的版本配置方式有所不同

先查看下未配置前現在的ip參數

[root@localhost ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 00:0c:29:bb:06:6b brd ff:ff:ff:ff:ff:ff
    altname enp3s0
    inet 192.168.252.151/24 brd 192.168.252.255 scope global dynamic noprefixroute ens160
       valid_lft 1731sec preferred_lft 1731sec
    inet6 fe80::20c:29ff:febb:66b/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever

可以看到現在是dhcp獲取的192.168.252.151

現在配置一下靜態：

root@localhost ~]# vim /etc/NetworkManager/system-connections/ens160.nmconnection

[connection]
id=ens160
uuid=dd894cca-3086-3461-9acf-97d7cc6a8188
type=ethernet
autoconnect-priority=-999
interface-name=ens160
timestamp=1668700728

[ethernet]

[ipv4]
method=auto        //自動獲取

[ipv6]
addr-gen-mode=eui64
method=auto

[proxy]

更改 [ipv4] 那段：

[connection]
id=ens160
uuid=dd894cca-3086-3461-9acf-97d7cc6a8188
type=ethernet
autoconnect-priority=-999
interface-name=ens160
timestamp=1668700728

[ethernet]

[ipv4]
address1=192.168.1.1/24,192.168.1.254    //添加ip/子網掩碼,網關
dns=192.168.1.1            //添加dns地址（多個用;隔開）
method=manual

[ipv6]
addr-gen-mode=eui64
method=auto

[proxy]

更改完成后保存退出

接下來寫入配置文件

[root@localhost ~]# nmcli c reload

再更新一下網卡配置

[root@localhost ~]# nmcli c up ens160 
Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/6)

靜態ip已配置完成啦

再查看下現在的tcp/ip參數

[root@localhost ~]# ip a 
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 00:0c:29:bb:06:6b brd ff:ff:ff:ff:ff:ff
    altname enp3s0
    inet 192.168.1.1/24 brd 192.168.1.255 scope global noprefixroute ens160
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:febb:66b/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever

可以看到現在未靜態配置的192.168.1.1

再查看一下dns地址

[root@localhost ~]# cat /etc/resolv.conf 
# Generated by NetworkManager
nameserver 192.168.1.1

可以看到均和上面配置的參數一致

整個就配置完成了

?文章來源地址http://www.zghlxwxcb.cn/news/detail-508856.html

?

?

?

到了這里，關于系統運維-Rocky Linux9.0配置IP地址TCP/IP參數的文章就介紹完了。如果您還想了解更多內容，請?jiān)谟疑辖撬阉鱐OY模板網以前的文章或繼續瀏覽下面的相關文章，希望大家以后多多支持TOY模板網！