環境
Unity : 2020.3.37f1
Pipeline : BRP
目的
備忘，便于日后索引
問題
正常手機顯卡芯片的浮點解析進度上的效果（其實不用手機上，PC 上將 uv * scale 一個巨大的值也會出現的）
異常手機顯卡芯片的浮點解析進度上的效果（其實不用手機上，PC 上將 uv * scale 一個巨大的值也會出現的）
解決
診斷發現是： UV 精度 scale 之后溢出了
這個 shader 是 網上的一位TA大佬 （聽說是叫： 貓大 的TA大佬 寫的，下面的 shader 可以看到是使用 ASE 連連看 生成的代碼）
// Made with Amplify Shader Editor
// Available at the Unity Asset Store - http://u3d.as/y3X
Shader "VFX/PandaShaderSampleV1.0"
{
Properties
{
[Enum(UnityEngine.Rendering.BlendMode)]_Scr("Scr", Float) = 5
[Enum(UnityEngine.Rendering.BlendMode)]_Dst("Dst", Float) = 10
[Enum(UnityEngine.Rendering.CullMode)]_CullMode("CullMode", Float) = 0
_MainTex("MainTex", 2D) = "white" {}
[Toggle]_MainTexAR("MainTexAR", Float) = 0
[HDR]_MainColor("MainColor", Color) = (1,1,1,1)
_MainTexUSpeed("MainTexUSpeed", Float) = 0
_MainTexVSpeed("MainTexVSpeed", Float) = 0
[Toggle]_CustomMainTex("CustomMainTex", Float) = 0
[Toggle(_FMASKTEX_ON)] _FMaskTex("FMaskTex", Float) = 0
_MaskTex("MaskTex", 2D) = "white" {}
[Toggle]_MaskTexAR("MaskTexAR", Float) = 1
_MaskTexUSpeed("MaskTexUSpeed", Float) = 0
_MaskTexVSpeed("MaskTexVSpeed", Float) = 0
[Toggle(_FDISTORTTEX_ON)] _FDistortTex("FDistortTex", Float) = 0
_DistortTex("DistortTex", 2D) = "white" {}
[Toggle]_DistortTexAR("DistortTexAR", Float) = 1
_DistortFactor("DistortFactor", Range( 0 , 1)) = 0
_DistortTexUSpeed("DistortTexUSpeed", Float) = 0
_DistortTexVSpeed("DistortTexVSpeed", Float) = 0
[Toggle]_DistortMainTex("DistortMainTex", Float) = 0
[Toggle]_DistortMaskTex("DistortMaskTex", Float) = 0
[Toggle]_DistortDissolveTex("DistortDissolveTex", Float) = 0
[Toggle(_FDISSOLVETEX_ON)] _FDissolveTex("FDissolveTex", Float) = 0
_DissolveTex("DissolveTex", 2D) = "white" {}
[Toggle]_DissolveTexAR("DissolveTexAR", Float) = 1
[HDR]_DissolveColor("DissolveColor", Color) = (1,1,1,1)
[Toggle]_CustomDissolve("CustomDissolve", Float) = 0
_DissolveFactor("DissolveFactor", Range( 0 , 1)) = 0
_DissolveSoft("DissolveSoft", Range( 0 , 1)) = 0.1
_DissolveWide("DissolveWide", Range( 0 , 1)) = 0.05
_DissolveTexUSpeed("DissolveTexUSpeed", Float) = 0
_DissolveTexVSpeed("DissolveTexVSpeed", Float) = 0
_MainAlpha("MainAlpha", Range( 0 , 10)) = 1
[Toggle(_FFNL_ON)] _FFnl("FFnl", Float) = 0
[Toggle(_FDEPTH_ON)] _FDepth("FDepth", Float) = 0
[HDR]_FnlColor("FnlColor", Color) = (1,1,1,1)
_FnlScale("FnlScale", Range( 0 , 2)) = 0
_FnlPower("FnlPower", Range( 1 , 10)) = 1
[Toggle]_ReFnl("ReFnl", Float) = 0
[Enum(Alpha,0,Add,1)]_BlendMode("BlendMode", Float) = 0
_DepthFade("DepthFade", Range( 0 , 10)) = 1
[HideInInspector] _texcoord2( "", 2D ) = "white" {}
[HideInInspector] _texcoord( "", 2D ) = "white" {}
[HideInInspector] __dirty( "", Int ) = 1
}
SubShader
{
Tags{ "RenderType" = "Transparent" "Queue" = "Transparent+0" "IsEmissive" = "true" }
Cull [_CullMode]
ZWrite Off
ZTest LEqual
Blend [_Scr] [_Dst], One OneMinusSrcAlpha
CGPROGRAM
#include "UnityShaderVariables.cginc"
#include "UnityCG.cginc"
#pragma target 3.0
#pragma shader_feature_local _FDISSOLVETEX_ON
#pragma shader_feature_local _FDISTORTTEX_ON
#pragma shader_feature_local _FFNL_ON
#pragma shader_feature_local _FMASKTEX_ON
#pragma shader_feature_local _FDEPTH_ON
#pragma surface surf Unlit keepalpha noshadow noambient novertexlights nolightmap nodynlightmap nodirlightmap nofog nometa noforwardadd
#undef TRANSFORM_TEX
#define TRANSFORM_TEX(tex,name) float4(tex.xy * name##_ST.xy + name##_ST.zw, tex.z, tex.w)
struct Input
{
float4 vertexColor : COLOR;
float2 uv_texcoord;
float4 uv2_texcoord2;
float3 worldPos;
half3 worldNormal;
float4 screenPos;
};
uniform half _Dst;
uniform half _CullMode;
uniform half _BlendMode;
uniform half _Scr;
uniform float4 _MainColor;
uniform sampler2D _MainTex;
uniform half _MainTexUSpeed;
uniform half _MainTexVSpeed;
uniform half _CustomMainTex;
uniform float4 _MainTex_ST;
uniform half _DistortMainTex;
uniform half _DistortTexAR;
uniform sampler2D _DistortTex;
uniform half _DistortTexUSpeed;
uniform half _DistortTexVSpeed;
uniform float4 _DistortTex_ST;
uniform half _DistortFactor;
uniform float4 _DissolveColor;
uniform half _CustomDissolve;
uniform half _DissolveFactor;
uniform half _DissolveWide;
uniform half _DissolveSoft;
uniform half _DissolveTexAR;
uniform sampler2D _DissolveTex;
uniform half _DissolveTexUSpeed;
uniform half _DissolveTexVSpeed;
uniform float4 _DissolveTex_ST;
uniform half _DistortDissolveTex;
uniform half _MainAlpha;
uniform half _ReFnl;
uniform half4 _FnlColor;
uniform half _FnlScale;
uniform half _FnlPower;
uniform half _MainTexAR;
uniform half _MaskTexAR;
uniform sampler2D _MaskTex;
uniform half _MaskTexUSpeed;
uniform half _MaskTexVSpeed;
uniform float4 _MaskTex_ST;
uniform half _DistortMaskTex;
UNITY_DECLARE_DEPTH_TEXTURE( _CameraDepthTexture );
uniform float4 _CameraDepthTexture_TexelSize;
uniform half _DepthFade;
inline half4 LightingUnlit( SurfaceOutput s, half3 lightDir, half atten )
{
return half4 ( 0, 0, 0, s.Alpha );
}
void surf( Input i , inout SurfaceOutput o )
{
float Scr106 = _Scr;
half2 appendResult4_g42 = (half2(_MainTexUSpeed , _MainTexVSpeed));
float2 uv_MainTex = i.uv_texcoord * _MainTex_ST.xy + _MainTex_ST.zw;
half2 temp_output_3_0_g39 = uv_MainTex;
half2 appendResult4_g33 = (half2(_DistortTexUSpeed , _DistortTexVSpeed));
float2 uv_DistortTex = i.uv_texcoord * _DistortTex_ST.xy + _DistortTex_ST.zw;
// jave.lin : 修復前
//half2 panner5_g33 = ( 1.0 * _Time.y * appendResult4_g33 + uv_DistortTex);
// jave.lin : 修復后
half2 panner5_g33 = ( 1.0 * frac(_Time.y * appendResult4_g33) + uv_DistortTex);
half4 tex2DNode7_g33 = tex2D( _DistortTex, panner5_g33 );
half Distort148 = ( ( _DistortTexAR == 0.0 ? tex2DNode7_g33.a : tex2DNode7_g33.r ) * _DistortFactor );
#ifdef _FDISTORTTEX_ON
half2 staticSwitch316 = ( _DistortMainTex == 0.0 ? temp_output_3_0_g39 : ( temp_output_3_0_g39 + Distort148 ) );
#else
half2 staticSwitch316 = uv_MainTex;
#endif
half2 appendResult330 = (half2(i.uv2_texcoord2.x , i.uv2_texcoord2.y));
// jave.lin : 修復前
//half2 panner5_g42 = ( 1.0 * _Time.y * appendResult4_g42 + (( _CustomMainTex )?( ( staticSwitch316 + appendResult330 ) ):( staticSwitch316 )));
// jave.lin : 修復后
half2 panner5_g42 = ( 1.0 * frac(_Time.y * appendResult4_g42) + (( _CustomMainTex )?( ( staticSwitch316 + appendResult330 ) ):( staticSwitch316 )));
half4 tex2DNode7_g42 = tex2D( _MainTex, panner5_g42 );
half4 MainTexColor215 = ( _MainColor * tex2DNode7_g42 );
half temp_output_275_0 = (-_DissolveWide + ((( _CustomDissolve )?( i.uv2_texcoord2.z ):( _DissolveFactor )) - 0.0) * (1.0 - -_DissolveWide) / (1.0 - 0.0));
half temp_output_277_0 = ( _DissolveSoft + 0.0001 );
half temp_output_272_0 = (-temp_output_277_0 + (( temp_output_275_0 + _DissolveWide ) - 0.0) * (1.0 - -temp_output_277_0) / (1.0 - 0.0));
half2 appendResult4_g41 = (half2(_DissolveTexUSpeed , _DissolveTexVSpeed));
float2 uv_DissolveTex = i.uv_texcoord * _DissolveTex_ST.xy + _DissolveTex_ST.zw;
half2 temp_output_3_0_g40 = uv_DissolveTex;
#ifdef _FDISTORTTEX_ON
half2 staticSwitch314 = ( _DistortDissolveTex == 0.0 ? temp_output_3_0_g40 : ( temp_output_3_0_g40 + Distort148 ) );
#else
half2 staticSwitch314 = uv_DissolveTex;
#endif
// jave.lin : 修復前
//half2 panner5_g41 = ( 1.0 * _Time.y * appendResult4_g41 + staticSwitch314);
// jave.lin : 修復后
half2 panner5_g41 = ( 1.0 * frac(_Time.y * appendResult4_g41) + staticSwitch314);
half4 tex2DNode7_g41 = tex2D( _DissolveTex, panner5_g41 );
half temp_output_308_20 = ( _DissolveTexAR == 0.0 ? tex2DNode7_g41.a : tex2DNode7_g41.r );
half smoothstepResult264 = smoothstep( temp_output_272_0 , ( temp_output_272_0 + temp_output_277_0 ) , temp_output_308_20);
half Alpha337 = _MainAlpha;
half4 lerpResult223 = lerp( MainTexColor215 , _DissolveColor , ( _DissolveColor.a * ( 1.0 - smoothstepResult264 ) * Alpha337 ));
#ifdef _FDISSOLVETEX_ON
half4 staticSwitch298 = lerpResult223;
#else
half4 staticSwitch298 = MainTexColor215;
#endif
half4 temp_cast_0 = (0.0).xxxx;
half Refnl339 = _ReFnl;
float3 ase_worldPos = i.worldPos;
half3 ase_worldViewDir = normalize( UnityWorldSpaceViewDir( ase_worldPos ) );
half3 ase_worldNormal = i.worldNormal;
half fresnelNdotV279 = dot( ase_worldNormal, ase_worldViewDir );
half fresnelNode279 = ( 0.0 + _FnlScale * pow( 1.0 - fresnelNdotV279, _FnlPower ) );
half temp_output_283_0 = saturate( fresnelNode279 );
half4 FnlMainColor286 = ( _FnlColor * temp_output_283_0 * _FnlColor.a );
half4 temp_cast_1 = (0.0).xxxx;
#ifdef _FFNL_ON
half4 staticSwitch300 = ( Refnl339 == 0.0 ? FnlMainColor286 : temp_cast_1 );
#else
half4 staticSwitch300 = temp_cast_0;
#endif
float4 MainColor98 = ( i.vertexColor * ( staticSwitch298 + staticSwitch300 ) );
float MainTexAlpha138 = ( _MainColor.a * ( _MainTexAR == 0.0 ? tex2DNode7_g42.a : tex2DNode7_g42.r ) );
half2 appendResult4_g44 = (half2(_MaskTexUSpeed , _MaskTexVSpeed));
float2 uv_MaskTex = i.uv_texcoord * _MaskTex_ST.xy + _MaskTex_ST.zw;
half2 temp_output_3_0_g43 = uv_MaskTex;
#ifdef _FDISTORTTEX_ON
half2 staticSwitch312 = ( _DistortMaskTex == 0.0 ? temp_output_3_0_g43 : ( temp_output_3_0_g43 + Distort148 ) );
#else
half2 staticSwitch312 = uv_MaskTex;
#endif
// jave.lin : 修復前
//half2 panner5_g44 = ( 1.0 * _Time.y * appendResult4_g44 + staticSwitch312);
// jave.lin : 修復后
half2 panner5_g44 = ( 1.0 * frac(_Time.y * appendResult4_g44) + staticSwitch312);
half4 tex2DNode7_g44 = tex2D( _MaskTex, panner5_g44 );
#ifdef _FMASKTEX_ON
half staticSwitch291 = ( _MaskTexAR == 0.0 ? tex2DNode7_g44.a : tex2DNode7_g44.r );
#else
half staticSwitch291 = 1.0;
#endif
half temp_output_270_0 = (-temp_output_277_0 + (temp_output_275_0 - 0.0) * (1.0 - -temp_output_277_0) / (1.0 - 0.0));
half smoothstepResult256 = smoothstep( temp_output_270_0 , ( temp_output_270_0 + temp_output_277_0 ) , temp_output_308_20);
half DissolveAlpha212 = smoothstepResult256;
#ifdef _FDISSOLVETEX_ON
half staticSwitch299 = DissolveAlpha212;
#else
half staticSwitch299 = 1.0;
#endif
half ReFnlAlpha318 = ( 1.0 - temp_output_283_0 );
#ifdef _FFNL_ON
half staticSwitch319 = ( Refnl339 == 0.0 ? 1.0 : ReFnlAlpha318 );
#else
half staticSwitch319 = 1.0;
#endif
float4 ase_screenPos = float4( i.screenPos.xyz , i.screenPos.w + 0.00000000001 );
half4 ase_screenPosNorm = ase_screenPos / ase_screenPos.w;
ase_screenPosNorm.z = ( UNITY_NEAR_CLIP_VALUE >= 0 ) ? ase_screenPosNorm.z : ase_screenPosNorm.z * 0.5 + 0.5;
float screenDepth348 = LinearEyeDepth(SAMPLE_DEPTH_TEXTURE( _CameraDepthTexture, ase_screenPosNorm.xy ));
half distanceDepth348 = abs( ( screenDepth348 - LinearEyeDepth( ase_screenPosNorm.z ) ) / ( _DepthFade ) );
#ifdef _FDEPTH_ON
half staticSwitch350 = saturate( distanceDepth348 );
#else
half staticSwitch350 = 1.0;
#endif
float MainAlpha97 = saturate( ( MainTexAlpha138 * staticSwitch291 * i.vertexColor.a * Alpha337 * staticSwitch299 * staticSwitch319 * staticSwitch350 ) );
o.Emission = ( Scr106 == 5.0 ? MainColor98 : ( MainColor98 * MainAlpha97 ) ).rgb;
half temp_output_100_0 = MainAlpha97;
o.Alpha = temp_output_100_0;
}
ENDCG
}
CustomEditor "SampleGUI"
}
上面的 shader 代碼中，搜索： “修復后”，機可查看到類似下面的代碼：
...
// jave.lin : 修復前
//half2 panner5_g33 = ( 1.0 * _Time.y * appendResult4_g33 + uv_DistortTex);
// jave.lin : 修復后
half2 panner5_g33 = ( 1.0 * frac(_Time.y * appendResult4_g33) + uv_DistortTex);
...
// jave.lin : 修復前
//half2 panner5_g42 = ( 1.0 * _Time.y * appendResult4_g42 + (( _CustomMainTex )?( ( staticSwitch316 + appendResult330 ) ):( staticSwitch316 )));
// jave.lin : 修復后
half2 panner5_g42 = ( 1.0 * frac(_Time.y * appendResult4_g42) + (( _CustomMainTex )?( ( staticSwitch316 + appendResult330 ) ):( staticSwitch316 )));
...
// jave.lin : 修復前
//half2 panner5_g41 = ( 1.0 * _Time.y * appendResult4_g41 + staticSwitch314);
// jave.lin : 修復后
half2 panner5_g41 = ( 1.0 * frac(_Time.y * appendResult4_g41) + staticSwitch314);
...
// jave.lin : 修復前
//half2 panner5_g44 = ( 1.0 * _Time.y * appendResult4_g44 + staticSwitch312);
// jave.lin : 修復后
half2 panner5_g44 = ( 1.0 * frac(_Time.y * appendResult4_g44) + staticSwitch312);
...
這種優化方式也有局限性的，因?yàn)槲覀兊?sampler 的 filer mode 是 repeat，所以 uv 值域可以控制再 -1 ~ 1 即可，因?yàn)榭梢允褂?frac 來優化，也可以 fmod(val, 1.0) 但是這個過于費，因?yàn)槭褂?frac 就OK
這個問題的是100%必現的，最終發布到出問題的手機上驗證，修復了
其實這個解決方法，我以前在學習 B站上的 莊懂 TA巨佬 就有分享過
現在想起幫助還是挺大的文章來源：http://www.zghlxwxcb.cn/news/detail-500537.html
Project
backup : Testing_Effect_Error_4_RenderDoc_UV精度不足、斷層的修復.rar文章來源地址http://www.zghlxwxcb.cn/news/detail-500537.html
到了這里，關于Unity - 記錄解決 部分手機設備上 浮點精度 不足 導致 UV 采樣斷層嚴重的 BUG的文章就介紹完了。如果您還想了解更多內容，請?jiān)谟疑辖撬阉鱐OY模板網以前的文章或繼續瀏覽下面的相關文章，希望大家以后多多支持TOY模板網！
