下面我們來配置我們總的網絡拓撲，（網絡拓撲圖雛形，，后續會加上去很多）
第一步我們配置總的網絡拓撲圖的DHCP中繼：
先看一下我的網絡設計雛形拓撲圖：
這個是我的網絡設計雛形圖
下面直接配置網絡的DHCP中繼：
先配置SW1的vlan和IP設置服務器的網關：
The device is running!
先配置基本的配置：
Sw1：配置sw2的配置：配置sw2的配置：
<Huawei>sys（進入配置模式）
[Huawei]sys sw1（改名）
[sw1]un in en（關閉提示）
[sw1]vlan batch 2 3 4（創建vlna 2 3 4）
[sw1]display this （顯示配置）
#
sysname sw1
#
undo info-center enable
#
vlan batch 2 to 4
#
cluster enable
ntdp enable
ndp enable
#
drop illegal-mac alarm
#
return
[sw1]dhcp enable （開啟DHCP配置）
[sw1]int GigabitEthernet 0/0/3（進入端口3）
[sw1-GigabitEthernet0/0/3]port link-type trunk（配置端口為主干模式）
[sw1-GigabitEthernet0/0/3]port trunk allow-pass vlan all （允許所有vlan通過）
[sw1-GigabitEthernet0/0/3]q
[sw1]int g
[sw1]int GigabitEthernet 0/0/7
[sw1-GigabitEthernet0/0/7]port link-type trunk
[sw1-GigabitEthernet0/0/7]port trunk allow-pass vlan all
[sw1-GigabitEthernet0/0/7]q
[sw1]int g
[sw1]int GigabitEthernet 0/0/2
[sw1-GigabitEthernet0/0/2]port link-type trunk [sw1-GigabitEthernet0/0/2]port trunk allow-pass vlan all
[sw1-GigabitEthernet0/0/2]q
[sw1]int g
[sw1]配置sw2的配置：
<sw2>sys
[Huawei]sys sw 2
[sw2]vlan batch 2 3 4
[sw2]dhcp enable
[sw2]un in en
[sw2]int GigabitEthernet 0/0/7
[sw2-GigabitEthernet0/0/7]port link-type trunk
[sw2-GigabitEthernet0/0/7]port trunk allow-pass vlan al
[sw2-GigabitEthernet0/0/7]port trunk allow-pass vlan all
[sw2-GigabitEthernet0/0/7]q
[sw2]int g
[sw2]int GigabitEthernet 0/0/2
[sw2-GigabitEthernet0/0/2]port link-type trunk
[sw2-GigabitEthernet0/0/2]port trunk allow-pass vlan all
[sw2-GigabitEthernet0/0/2]q
[sw2]
[sw2]int g
[sw2]int GigabitEthernet 0/0/3
[sw2-GigabitEthernet0/0/3]port link-type trunk
[sw2-GigabitEthernet0/0/3]port trunk allow-pass vlan all
[sw2-GigabitEthernet0/0/3]q?
下面來配置一下sw3:
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys sw3
[sw3]un in en
Info: Information center is disabled.
[sw3]int g
[sw3]int GigabitEthernet 0/0/1
[sw3-GigabitEthernet0/0/1]port link-type trunk
[sw3-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[sw3-GigabitEthernet0/0/1]q
[sw3]int e
[sw3]int Eth
[sw3]int Ethernet0/0/1
[sw3-Ethernet0/0/1]port link-type access
[sw3-Ethernet0/0/1]q
[sw3]int e
[sw3]int Eth
[sw3]int Ethernet0/0/2
[sw3-Ethernet0/0/2]port link-type access
[sw3-Ethernet0/0/2]q
[sw3]int e
[sw3]int Eth
[sw3]int Ethernet0/0/3
[sw3-Ethernet0/0/3]port link-type access
[sw3-Ethernet0/0/3]q
[sw3]vlan b
[sw3]vlan batch 2 3 4
[sw3]?
?下面配置以下sw4:
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys sw4
[sw4]int g
[sw4]int GigabitEthernet 0/0/1
[sw4-GigabitEthernet0/0/1]port link-type trunk
[sw4-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[sw4-GigabitEthernet0/0/1]
[sw4-GigabitEthernet0/0/1]q
[sw4]int Ethernet0/0/3
[sw4-Ethernet0/0/3]port link-type trunk
[sw4-Ethernet0/0/3]port trunk allow-pass vlan all
[sw4-Ethernet0/0/3]q
[sw4]vlan batch 2 3 4(創建vlan）
[sw4]int Ethernet0/0/1 （進入端口1）
[sw4-Ethernet0/0/1]port link-type access （配置接口為連接模式）
[sw4-Ethernet0/0/1]port default vlan 2（允許通過vlan2）
[sw4-Ethernet0/0/1]q
[sw4]int Ethernet0/0/2
[sw4-Ethernet0/0/2]port link-type access
[sw4-Ethernet0/0/2]
[sw4]下面配置sw5:
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys sw5
[sw5]vlan batch 2 3 4
[sw5]un in en
[sw5]int Eth
[sw5]int Ethernet0/0/3
[sw5-Ethernet0/0/3]port link-type trunk
[sw5-Ethernet0/0/3]port trunk allow-pass vlan all
[sw5-Ethernet0/0/3]q
[sw5]int g
[sw5]int GigabitEthernet 0/0/1
[sw5-GigabitEthernet0/0/1]port link-type trunk
[sw5-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[sw5-GigabitEthernet0/0/1]q
[sw5]int Eth
[sw5]int Ethernet0/0/1
[sw5-Ethernet0/0/1]port link-type access
[sw5-Ethernet0/0/1]port default vlan 3
[sw5-Ethernet0/0/1]q
[sw5]
[sw5]int Ethernet0/0/2
[sw5-Ethernet0/0/2]port link-type access
[sw5-Ethernet0/0/2]下面來配置sw6:
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys sw6
[sw6]un in en
[sw6]interface
[sw6]interface g
[sw6]interface GigabitEthernet 0/0/1
[sw6-GigabitEthernet0/0/1]port link-type trunk
[sw6-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[sw6-GigabitEthernet0/0/1]q
[sw6]int Eth
[sw6]int Ethernet0/0/1
[sw6-Ethernet0/0/1]port link-type access
[sw6-Ethernet0/0/1]port default vlan 3
[sw6-Ethernet0/0/1]q
[sw6]int Eth
[sw6]int Ethernet0/0/2
[sw6-Ethernet0/0/2]port link-type access
[sw6-Ethernet0/0/2]q
[sw6]?
?
上面這些是我們在配置DHCP乃至所有網絡配置的基礎
下面呢來配置一下我們的vlan的IP作為服務器的網關：
配置sw1：
<sw1>sys
Enter system view, return user view with Ctrl+Z.
[sw1]int g
[sw1]int GigabitEthernet 0/0/1
[sw1-GigabitEthernet0/0/1]port link-type trunk
[sw1-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[sw1-GigabitEthernet0/0/1]q
[sw1]int Vlanif 2
[sw1-Vlanif2]ip ad 192.168.2.254 24
[sw1-Vlanif2]q
[sw1]int v
[sw1]int Vlanif 3
[sw1-Vlanif3]ip address 192.168.3.254 24
[sw1-Vlanif3]q
[sw1]int Vlanif 4
[sw1-Vlanif4]ip address 192.168.4.254 24
[sw1-Vlanif4]q
[sw1]下面來配置一下sw2:
<sw2>sys
[sw2]int g
[sw2]int GigabitEthernet 0/0/1
[sw2-GigabitEthernet0/0/1]port link-type trunk
[sw2-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[sw2]int Vlanif 2
[sw2-Vlanif2]ip ad 192.168.2.254 24
[sw2-Vlanif2]q
[sw2]int Vlanif 3
[sw2-Vlanif3]ip ad 192.168.3.254 24
[sw2-Vlanif3]q
[sw2]int Vlanif 4
[sw2-Vlanif4]ip ad 192.168.4.254 24
[sw2-Vlanif4]q
[sw2]
?文章來源：http://www.zghlxwxcb.cn/news/detail-477418.html
?不會的可以留言交流：文章來源地址http://www.zghlxwxcb.cn/news/detail-477418.html
到了這里，關于用華為模擬器ENSP構造校園網（第二天）配置總網絡拓撲DHCP中繼的文章就介紹完了。如果您還想了解更多內容，請在右上角搜索TOY模板網以前的文章或繼續瀏覽下面的相關文章，希望大家以后多多支持TOY模板網！
